Manufacturing Utilities Manager
Italtile Ceramics (Pty) Ltd · Vereeniging, Gauteng
Stop applying one at a time.
JobAlertsZA auto-applies to South African jobs like this one for you, overnight. Upload your CV once — we do the applying.
Start free — we apply for you →Introduction
We are looking for a GCC-holding Electrical Engineer to join our business. The role will be responsible for providing safe, reliable and cost-effective electricity, gas, water and compressed air to the four tile factories on the Vereeniging and Hammanskraal sites. As an electrical engineer holding a Government Certificate of Competency and the GMR 2(1) designation for electrical and utilities systems, the Utilities Manager is accountable for the 88 kV substations and the 88 kV, 11 kV and 400 V networks, the 10 MW Vereeniging and 2.3 MW Gryphon solar plants, gas supply, the coal-fired hot air generators at the clay plant, water supply, and compressed air. The role measures and reports energy use for each factory, builds the roadmap to track energy down to machine level, and leads projects that reduce the unit cost of energy and protect the business against supply interruptions. Duties & Responsibilities
Key Responsibilities 1. Legal Appointment, Safety & Statutory Compliance • Act as the designated GMR 2(1) competent person for the electrical supply and distribution systems and utilities machinery at the Vereeniging and Hammanskraal sites, and keep the designation and any Department of Employment and Labour permissions it requires current. • Support the Section 16(2) appointee in discharging OHS Act duties relating to electrical and utilities systems. • Ensure compliance with the Electrical Machinery Regulations, the Electrical Installation Regulations (certificates of compliance) and the Pressure Equipment Regulations (gas installations and air receivers). • Keep a statutory inspection and certification register for utilities assets, with 100% on-time completion. • Ensure substations, switch rooms, gas stations and solar plants are secured, signed and access-controlled. • Lead risk assessments, incident investigations and emergency drills for electrical, gas and water incidents. 2. 88 kV Substations & the 88 kV, 11 kV and 400 V Networks • Accountable for the maintenance and reliability of the 88 kV substations and of all 88 kV, 11 kV and 400 V switchgear and transformers, including protection systems, earthing and lightning protection, DC systems and batteries, cables, power factor correction and standby generators. • Run the transformer maintenance programme: oil sampling and dissolved gas analysis, tap changer servicing, bushing, cooling and breather checks, and oil treatment or replacement when results require it. • Run the switchgear and protection programme: circuit-breaker servicing and timing tests, protection relay testing and setting coordination, insulation and earth resistance testing, and thermographic surveys. • Keep single-line diagrams, protection settings, and fault-level and arc-flash studies current for every site. • Hold strategic spares and a contingency plan for the loss of a transformer or switchboard, and lead the response to HV and MV faults. • Manage notified maximum demand, load growth and power factor for each point of supply, and plan capacity for new kilns and lines with the Group Engineering Manager. 3. Electrical Switching • Maintain and enforce the HV operating regulations (ORHVS or equivalent) for all 88 kV and 11 kV switching, isolation, earthing and permits to work. • Build competent HV/MV teams within the factories to assist with switching: select, train, assess and authorise electricians at each factory. • Authorise competent persons for switching in writing, keep the register of authorised persons current, and arrange refresher training and re-assessment. • Prepare or approve switching programmes, and supervise or carry out critical HV switching. • Coordinate planned outages with Eskom, the Factory Managers and the Maintenance Managers so that production loss is kept to a minimum. 4. Solar PV Plants • Accountable for the operation and maintenance of the 10 MW Vereeniging and 2.3 MW Gryphon solar plants, including inverters, transformers, modules, trackers or mounting structures, protection and plant control systems. • Maximise solar yield: track generation, availability and performance ratio daily, manage module cleaning and vegetation control, and resolve inverter and string faults quickly. • Manage the solar operations and maintenance contractors and equipment warranties against measurable performance guarantees. • Keep NERSA registrations and the Eskom or municipal grid connection agreements and grid code requirements for the plants current. • Use the solar plants to reduce maximum demand and purchased energy cost, and assess further solar, battery storage and wheeling options. 5. Gas Supply & Hot Air Generators • Manage the gas supply to the factories: Sasol natural gas and gas from the coal-to-gas plant. • Maintain the gas pressure-reduction and metering stations and the site gas reticulation, with leak surveys, emergency shut-off testing and certificates of conformity. • Monitor gas pressure, quality (heating value) and consumption for each factory and major user. • Lead the technical planning for changes in gas supply, including the change from Sasol natural gas to methane-rich gas or other alternatives, and the readiness of burners and equipment for a different gas quality. • Support the Group Engineering Manager and the Maintenance Managers on burner and combustion efficiency. • Manage the coal-fired hot air generators at the clay plant, which supply hot air to the spray dryers: reliable hot air supply, coal consumption and combustion efficiency. 6. Water & Compressed Air • Manage the municipal water supply and the on-site boreholes, including pumps, storage, treatment, water quality testing and water use authorisations. • Keep a water balance for each site, find and repair leaks, and increase water reuse where the process allows. • Manage compressed air generation and distribution: compressors, dryers, receivers and ring mains, pressure set points, leak surveys and the energy used per unit of air. 7. Utilities Maintenance on Pragma On Key • Drive predictive, preventive and reactive maintenance on all utilities assets with the Group Engineering Manager, using Pragma On Key as the single maintenance system. • Build and maintain the utilities asset register, criticality ranking, maintenance task lists and PM schedules in On Key. • Use condition monitoring (thermography, oil analysis, partial discharge and vibration) to find faults before they cause a supply interruption. • Measure and improve maintenance KPIs for utilities assets using the group definitions, including PM compliance, planned maintenance percentage, MTBF and MTTR. • Lead root-cause analysis for every supply interruption and repeat failure. 8. Energy Metering, Reporting & Billing • Issue daily, weekly and monthly electricity, gas and water reports for each site and factory. • Produce the monthly energy report for the Finance team, showing the energy and cost split per factory. • Verify the monthly Eskom, Sasol and municipal accounts against meter readings, tariffs and contract terms before payment, and query and recover billing errors. • Set and report energy KPIs: energy use per m² (kWh/m² and GJ/m²), unit cost (R/kWh and R/GJ), maximum demand, power factor, solar share of electricity, and water use per m². • Lead the automation project for continuous energy monitoring: metering, data collection and automated dashboards that replace manual readings and reports. • Keep check meters calibrated and energy data accurate and complete. 9. Energy Roadmap • Develop and own the energy roadmap: start from the inc